A physical product business can have enough interest to feel promising and still run into stockouts, late dispatch or too much cash tied up in inventory. A useful stock plan connects expected weekly orders with supplier lead time and the hours available to pack. This guide shows a simple 12-week method, a worked example in £ and the records to check before you commit to a larger order.
It is for makers, small ecommerce brands and product sellers managing their own stock or coordinating a supplier. The numbers below illustrate a planning scenario, not a sales forecast. Replace them with dated order, stock, supplier and fulfilment evidence from your business.
Map demand, stock and fulfilment in one focused plan
Use the free Physical Products Simulator to model 12 weeks of weekly orders, replenishment, stock availability and packing capacity. It highlights one practical next check and creates a downloadable three-page plan.
What should a physical product stock plan answer?
A small, useful plan links four operating questions:
- How many orders or units might you need to fulfil each week, and what evidence supports that assumption?
- How many saleable units are available after confirmed orders, damaged goods and reservations?
- How long does a replenishment order actually take from decision to usable stock?
- Can your team receive, check, pack and dispatch the likely workload within the promise shown to customers?
These questions are connected. A supplier may meet its quoted lead time while a stock count is wrong. A forecast may be reasonable while packing hours are not. Keep the inputs visible so you can see which assumption needs checking, rather than treating one projected sales figure as certainty.

Step 1: Set a demand assumption and label its evidence
Choose one product or product family and a planning interval. Weekly units are often easier to compare with supplier lead time and packing capacity than a monthly sales target. If you sell several variants, keep sizes, colours or bundles separate when they have different demand or replenishment constraints.
Use the strongest available evidence for the starting rate: completed orders, recent sell-through, confirmed pre-orders or a clearly marked early estimate. Separate paid orders from enquiries, social engagement and verbal interest. Note the date range and source. If demand is seasonal or changing after a campaign, do not assume the latest week repeats unchanged for a full quarter.
For a practical first pass, compare a base case with a lower and higher case. The purpose is not to find a perfect forecast. It is to identify whether a plausible change would create a stock, cash or fulfilment problem that you should investigate before ordering.
Step 2: Calculate the stock you can genuinely sell
Record the date of the count and distinguish saleable units from stock that is damaged, reserved for an order, held for photography, awaiting inspection or otherwise unavailable. Then reconcile the physical count with your inventory record and open purchase orders.
For each product, track at least: opening saleable units, confirmed demand, receipts expected, the supplier’s latest lead-time estimate and any minimum order quantity. A purchase order is not usable stock until it arrives, passes any needed checks and is ready to fulfil. Treat delivery dates as estimates until confirmed, and record delays rather than quietly shifting the date in your plan.
Useful next check: count one representative product, compare it with the system balance and explain every difference. Fix the record before using it to decide whether to reorder.
Step 3: Use lead time to think about the reorder point
A simple working rule is:
Reorder point ≈ expected demand during supplier lead time + safety stock
For example, if average demand is 18 units a week and replenishment takes two weeks, lead-time demand is about 36 units. A separate safety buffer may be sensible if demand or supplier timing varies, but its size should reflect your own risk, cash and storage constraints. This rough rule is a prompt to investigate, not a substitute for a product-specific inventory method.
Check what “lead time” means in the supplier’s quote. It may start at payment, approval of artwork, production completion or dispatch, and it may exclude transit, customs, receiving and quality checks. Record the dates from recent orders so your planning assumption reflects the full time until stock is ready to sell.

Step 4: Check packing capacity against the promise you make
Estimate the time for the complete order task, not only the moment spent putting an item in a box. Depending on your setup, it can include picking, checking, packing, labelling, printing paperwork, booking a carrier and handling exceptions. Use a short sample of real orders to estimate an average, and note unusual or multi-item orders separately.
As a basic capacity check:
Weekly packing capacity = available packing minutes ÷ average minutes per order
If a seller has 8 hours available in a week and each order takes about 12 minutes, that is 40 orders of theoretical packing capacity. It is not a recommended utilisation target: receiving stock, customer support, breaks, collection cut-offs and variable order complexity all use time. Leave room for variation and check the result against actual dispatch performance.

A worked 12-week example in £
Here is the simulator’s illustrative starting scenario. It assumes 18 average orders a week, demand increasing by 5% every four weeks, one unit per order, opening stock of 120 units, a reorder point of 45 units, replenishment of 100 units, a 14-day supplier lead time, 8 packing hours per week, 12 minutes per order, a selling price of £24 and a product cost of £8 per unit.
Under those inputs, the model produces 228 fulfilled orders across 12 weeks, no missed orders and 92 units of closing stock. It places replenishment receipts in weeks 7 and 12 according to its weekly planning assumptions. At £24 per order, sales value is £5,472. Subtracting the £8 product cost for each fulfilled unit gives £3,648 of product contribution before other costs.
| Illustrative measure | Scenario result | What to verify |
|---|---|---|
| Fulfilled orders | 228 over 12 weeks | Actual weekly orders and any seasonality or promotion effects |
| Sales value | £5,472 | Realised selling price, discounts, refunds and order mix |
| Product contribution | £3,648 | Current unit cost and any other variable costs not included |
| Closing stock | 92 units | Saleable opening count, purchase order dates and receipts |
| Packing capacity | 40 orders a week, theoretical | Observed time per order and hours actually available |
This is deliberately a narrow model. Product contribution here means sales value less product cost only. It excludes packaging, delivery, payment fees, advertising, returns, VAT, tax, overhead, owner time and cash timing. Its weekly demand and receipt rules simplify real purchasing decisions. The results are not a forecast, profit figure, financial advice or guarantee of business success. Change the assumptions and compare scenarios before relying on the output.
See which stock assumption needs attention first
Enter your own weekly order rate, lead time, stock and packing inputs. The simulator presents the result as a planning scenario and gives you one practical next check to take back to your records or supplier.
How to turn a scenario into a useful decision
- Check the inputs. Reconcile the opening count, confirm current supplier timing and use recent order data.
- Change one assumption at a time. Compare a slower demand case, longer lead time or reduced packing availability so you can see what drives the result.
- Separate units from cash. A stock receipt can improve availability while increasing cash committed. Map deposits, balances and expected customer receipts separately.
- Choose a small verification action. Ask a supplier to confirm the next production and delivery dates, time ten orders, or reconcile one product’s stock.
- Set a review date. Compare the scenario with actual orders and receipts after a suitable interval. Update the model when the evidence changes.
If inventory commitments affect your cash runway, pair this exercise with a wholesale cash-flow planning guide or your own rolling cash view. For the broader costs of starting a shop, see how to plan an ecommerce startup budget. Those questions are related, but they are not the same as checking weekly stock availability and fulfilment capacity.
UK product, delivery and customer checks
Your stock plan should support an accurate customer promise. Before a customer orders, make sure product descriptions, payment and delivery information, delivery costs and terms are clear for your selling channel. GOV.UK’s guidance explains online selling information for businesses, including pre-order information and order confirmation.
If you make, import, distribute or sell consumer products, understand the responsibilities that apply to your role and product. Keep supplier and batch records that help you trace what was received and sold, and check the relevant GOV.UK product safety advice for businesses. Requirements vary by product and circumstance. This guide is general business education, not legal, tax or accounting advice; use current official guidance or a qualified adviser for your situation.
Common stock-planning mistakes
- Counting every unit as available. Separate damaged, reserved, sample and uninspected stock from saleable inventory.
- Using a supplier’s best-case date. Compare quoted lead time with actual end-to-end receipt history and include inspection time.
- Treating interest as demand. Label enquiries and audience activity separately from paid or confirmed orders.
- Ignoring fulfilment work. Packing capacity can be the bottleneck even when stock is available.
- Calling contribution profit. The worked example subtracts product cost only; it does not cover all business expenses.
- Setting a reorder trigger without context. A single threshold may be unsuitable when product demand, lead time, minimum order quantity or cash constraints vary.
Frequently asked questions
How much stock should a small product business keep?
There is no universal quantity. Consider dated demand evidence, supplier lead time, demand variability, storage, minimum order quantities, cash and the customer promise you can support. Start with a transparent scenario and verify the inputs before placing a larger order.
What is a simple reorder point?
A basic estimate is expected demand during lead time plus a safety buffer. For 18 units a week and a two-week lead time, lead-time demand is about 36 units before any buffer. Review the full delivery-to-ready interval and choose a buffer that reflects your own variability and constraints.
How do I estimate packing capacity?
Time a representative sample of complete orders, divide the minutes genuinely available for fulfilment by average minutes per order, then leave capacity for exceptions and other work. Compare the estimate with actual dispatch performance rather than assuming every available minute is productive packing time.
Does the simulator predict sales or profit?
No. It models the assumptions you enter over 12 weeks. Its product contribution subtracts product cost only and excludes many other expenses and timing effects. Use it to identify a question to verify, not as a sales forecast or profit guarantee.
Build a clearer stock and fulfilment plan
Use your own weekly demand, supplier timing and packing assumptions to see a 12-week scenario, then download a personalised plan with the key checks in one place.


